Product Variations
Drum - 54.2 gal / 205 L
Pail - 5 gal / 18.9 L
Aerosol - 340 g / 12 oz (sold individually or Box of 12)
Anchor Chain Corrosion Control
S2S Anchor Chain Corrosion Control polar bonds to metal and creeps into hard to reach areas. It requires no sandblasting and can be applied to damp, rusted or painted surfaces. Ideal for the entire anchoring system.
Recommended Uses
-
Commercial vessels
-
Offshore oil & gas platforms
-
Navigational buoys
-
Mooring buoys
-
Cruise ships
-
Landing craft ramps
Advantages
-
No sandblasting
-
Can be applied to damp surfaces
-
Polar bonds to all metals, even over existing rust and paint
-
Stops rust on contact
-
Creeps into pitting corrosion, cracks and crevices
-
Excellent lubricant and anti-seize
-
Prevents corrosion between links
-
Dielectric properties; stops electrolysis
-
Non-hazardous and non-toxic
Application
It can be applied to rusted, painted, damp, and bare metal. No sandblasting required. Remove all debris, soap, and degreaser from the metal surface. To ensure long-lasting protection of corroded or previously coated surfaces, a wire brush may be used to remove all or most loose corrosion.
For best results, apply when surface temperatures are between 41F and 99F (5°C – 37°C). Apply a thicker coat over known problem areas, edges, cracks, and welds. Extremely old, porous metal may require a thicker-than-normal layer due to the product's tendency to penetrate deep.
Tech Stuff
