Automotive Corrosion Control
S2S Automotive Rust Proofing is the ultimate rust inhibitor for cars, trucks and trailers. It is easy-to-apply and polar bonds to metal, providing long-term protection from extreme weather, road salt and sand.
Product Variations
Drum - 54.2 gal / 205 L
Pail - 5 gal / 18.9 L
Can - 3.78 L / 1 gal
Aerosol - 340 g / 12 oz (sold individually or Box of 12)
Recommended Uses
-
Fleet vehicles
-
Trucks and trailers
-
Heavy equipment
-
Automobiles
-
Rail cars
-
Agricultural equipment
-
Battery terminals
-
Electrical connectors
-
Engine bays
Advantages
-
Easy-to-apply
-
Works on dissimilar metals
-
Resists splash and spray
-
Penetrates under existing rust and de-scales
-
Non-tacky coating does not attract dirt and debris
-
Electrically non-conductive; stops electrolysis
-
Rubber compatible to ASTM D471 standards
-
Wide range of operating temperatures
-
Self-healing film creeps into scratches
-
No curing time
-
Non-hazardous, non-toxic and eco-friendly
It can be applied to rusted, painted, damp, and bare metal. No sandblasting required. Remove all debris, soap, and degreaser from the metal surface. To ensure long-lasting protection of corroded or previously coated surfaces, a wire brush may be used to remove all or most loose corrosion.
For best results, apply when surface temperatures are between 41F and 99F (5°C – 37°C). Apply a thicker coat over known problem areas, edges, cracks, and welds. Extremely old, porous metal may require a thicker-than-normal layer due to the product's tendency to penetrate deep.
Application
Tech Stuff
