DIELECTRIC
SPRAY
S2S Dielectric Spray penetrates and creeps to provide a self-healing, non-hardening protective film. Apply it directly to circuit boards, battery terminals and electronics to halt electrolysis and prevent corrosion.
Product Variations
Aerosol - 180 g / 6.3 oz (sold individually or Box of 12)
These two drills were submerged in salt water for three months. Top drill was coated in S2S
Dielectric Spray. Bottom drill was left untreated.
The drill coated in S2S remains rust free.
The Power Drill Case Study>>>>>
Recommended Uses
-
Circuit boards
-
Wires
-
Battery terminals
-
Electric motors
-
Electronics
-
Switches
-
Connectors
Advantages
-
Displaces moisture
-
Polar bonds to all metal surfaces
-
Penetrates existing rust & corrosion
-
Shuts down corrosion & electrolysis
-
Resists splash, spray & submersion
-
High pressure lubricant
-
Dielectric strength >40kV
-
Environmentally Friendly
Ensure surface is clean and free of debris. Apply product
evenly. For best results, apply when surface temperatures
are between 41F and 99F (5°C – 37°C).
Application
Tech Stuff
