Wire Rope Corrosion Control
S2S Wire Rope Corrosion Control polar bonds to metal, like a magnet to steel, and displaces water and oxygen. Unlike grease, S2S penetrates all the way to the core of wire ropes providing thorough protection and excellent anti-seize capabilities.
Drum - 54.2 gal / 205 L
Pail - 5 gal / 18.9 L
Can - 3.78 L / 1 gal
Aerosol - 340 g / 12 oz (sold individually or Box of 12)
Recommended Uses
-
Cranes
-
Winches
-
Hoists
-
Mooring lines
-
Towing wire ropes
-
Drilling rigs
-
Suspension bridges
-
Guy wires
-
Wire rope slings
-
Post tension cables
-
Easy-to-apply
-
Polar bonds to all metals
-
Long lasting adhesion
-
Non-tacky film resists dirt and debris
-
Penetrates and lubricates to the core
-
Reduces friction and wear
-
Electrically non-conductive; stops electrolysis
-
Can withstand extreme temperatures
-
Non-hazardous and non-toxic
-
Can be covered with S2S HD Corrosion Shield for extra protection
-
Excellent for loosening seized studs and nuts in valves, flanges etc.
Tech Stuff
Advantages
It can be applied to rusted, painted, damp, and bare metal. No sandblasting required. Remove all debris, soap, and degreaser from the metal surface. To ensure long-lasting protection of corroded or previously coated surfaces, a wire brush may be used to remove all or most loose corrosion.
For best results, apply when surface temperatures are between 41F and 99F (5°C – 37°C). Apply a thicker coat over known problem areas, edges, cracks, and welds. Extremely old, porous metal may require a thicker-than-normal layer due to the product's tendency to penetrate deep.